Page 17 – Alldocube Global

win2tabless

https://www.alldocube.com/en/forums/users/win2tabless/

Replies created

Topic	Forum	Replies/Views	Last activity
New Alldocube M5X Firmware	Technical Discussion	1 2514	win2tabless 2019-07-01 9:56
you don’t need to re-write the IMEI number unless you’re using Format-all-and-upgrade option when flashing!
iWork 10 pro battery win10 problem	Technical Discussion	8 4976	ridholloh 2020-12-18 7:04
If the Android system exists, you can check whether the charging under Android is normal. or if you have a usb ammeter, you can also check if the actual charging current is normal.
ALLDOCUBE X1 (T801) SYSTEM UPDATE	Technical Discussion	1 3790	win2tabless 2019-06-05 12:36
the reason it show Google Play Protect not be certified is Google does not require that machines sold overseas must be GMS certified until Android 8.0. and about your 3 qusetions: 1.using mtk spflashtool to flash factory firmware do not need unlocking bootloader. 2.this factory firmware flashing need you Paying attention to the backup of the original data, because it tends to erase your machine’s data.so don’t flash system.img alone 4.MTK platform machine normal flashing will not let the machine die completely, even if it looks like a fake dead state, try to make the machine completely power off it will can be re-flashed
need nvram Alldocube Free Young X5 4G Phablet	Technical Discussion	5 2025	win2tabless 2021-06-21 9:51
you can use mtk sn write tool to re-write mac address :https://androidmtk.com/download-sn-write-tool
reset to factory Win10 problem iWork10	Technical Discussion	4 4862	Profesjonalna Firma 2020-07-26 4:57
It is recommended that you reinstall windows os , and then restore drivers for i15tc:https://mega.nz/#!aGYEWShD!csFB2U8Ng09X97VIVKTU99AFrzsDyYu9or7Hw8YoTaU
AlldoCube X. No Boot. No led. No power+UpVolume.	Technical Discussion	21 18726	Hmelex 2021-05-10 4:46
If the tablet does not respond at all, and may be caused by a hardware problem. It is recommended that you contact the official service by email to see if there is some way to repair it.
Cube Mix Plus 2	General Discussion	2 4432	Vesko 2019-04-29 14:53
Machines with the new Intel 5-6W power-consuming CPUs will probably have to wait six months or more, and such CPUs are now in serious shortage.
AlldoCube X. No Boot. No led. No power+UpVolume.	Technical Discussion	21 18726	Hmelex 2021-05-10 4:46
So are you using the original fast charger? There may be several reasons for your situation: 1. Battery power is too low, resulting in the machine charging current is relatively small, can not start. 2. System damage, no system 3. There is a problem with the motherboard hardware.
AlldoCube X. No Boot. No led. No power+UpVolume.	Technical Discussion	21 18726	Hmelex 2021-05-10 4:46
“Connecting to a laptop with Windows 10 shows the same VA info”——what’s this va info means?
IWork 8 Air bricked (i1 TF) after update bios	General Discussion	5 3851	gbaz gbaz 2019-11-21 17:52
Unfortunate news! Please try to use hdmi to connect the tablet to the another monitor to see if it can be displayed. If it can be displayed, you can try to re-flash the correct bios rom file by another monitor . Otherwise, you can only use the biso rom programmer to burn the bios file.

Viewing 10 posts - 161 through 170 (of 213 total)

← 1 2 3 … 16 17 18 … 20 21 22 →