|
I can not start the tablet – Alldocube X ??!!
|
General Discussion
|
2
5775
|
|
Hi Tareq,
have you find a solution for you problem with alldocube x?
I have the same problem since 2 month and no solution doesn‘ t work.
pls, give me a short feedback! THX
|
|
Stock firmware for Alldocube X
|
General Discussion
|
9
5142
|
|
|
Hello win2tabless,
I have tasted it with the flashing a few more times.
The device always displayed “MEDIA TEK DA USB VCOM (Android) (COM9)”.
The dowloading process was always very fast.
The last time I tried it was the following: “MEDIA TEK PreLoader USB VCOM (Android) (COM7)” and the download took much longer than usual. I read that the preloader is the right driver.
Since the last attempt but nothing more. Not even a short flashlight and the flashtool will not start download anymore.
The device is recognized by the PC but still – at least the typical signal.
|
|
Stock firmware for Alldocube X
|
General Discussion
|
9
5142
|
|
|
Hi Alex,
I used the MTP driver tool from the alldocube page. When I was synonymous to the chipset data displayed on the left. With a newer version of the SP Flashtool I did not get any values left.
Nevertheless, the download works fine, the pad is also recognized by the signal, but it does nothing after the download.
Do you have another tip?
Hi Alex,
I used the MTP driver tool from the alldocube page. When I was synonymous to the chipset data displayed on the left. With a newer version of the SP Flashtool I did not get any values left.
Nevertheless, the download works fine, the pad is also recognized by the signal, but it does nothing after the download.
Do you have another tip?
|
|
Stock firmware for Alldocube X
|
General Discussion
|
9
5142
|
|
|
Hi Alex! Did you get your Alldocube X up and running?
Should not at least the Android logo or the boot menu appear in the current state?
For me, sometimes only a light stripe appears (horizontal). Thanks for your tip. I will test it tomorrow and tell you.
|
|
Stock firmware for Alldocube X
|
General Discussion
|
9
5142
|
|
|
Hello Alex, I’m from Germany.
I probably have the same problem as you.
I can not start the tablet from the beginning. There is no Android logo, boat menu, etc.
I have already tried all reset forms.
The only
Reaction I get the memory on the PC when I connect this is displayed as U10005E.
I wanted to download the software (available at alldocube.com) “X (U1005E) Android8.1-ALLDOCUBE-EU-190108”, but then the memory does not respond.
I have no other solution and I do not dare to open the case.
The service at alldocube does not seem to be currently available. I hope that’s because of their New Year celebration.
So far, there was no reaction. The tablet looks great and valuable, but absolutely useless in this condition.
I hope we find a solution or you offer a guarantee.
Fingers crossed!
|
