ryanmoon

I have two questions

Does it support Android 13 updates?
Is it impossible to change the position of the navigation bar?

2023-08-04 @ 14:53
|
Reply
Sandro

OTA update do not work. The update downloads over and over again and never really being installed!

Please update correction.

2023-07-28 @ 12:46
|
Reply
Zekita

What causes OTA updates from being installed? The update downloads over and over again and never realy being installed!

2023-07-26 @ 06:07
|
Reply
villasgeo

My story :
I receive my tablet Play50Pro(T1030M) with T1030M_V2.0_20230324_20230324-1540 fw inside.
If check for OTA cant find anything says “Your device’s software is currently up to date.”
I install from my computer the “iPlay50Pro(T1030M)_EN_20230628” via SP_Flash_Tool_v6.2228 ( i use the auth_sv5.auth MT6789 DA File from https://androiddatahost.com/yubrg ) .
After this upgrade , i receive a OTA and update to T1030M_V2.0_20230719_20230719-2133 .
All works very nice

2023-07-25 @ 19:56
|
Reply
1. Tihamer reply to villasgeo
  
  Hello! I have two questions: when you installed version 0628, was preloaderxxx.bin also installed or should it be omitted? imei is not in danger, does the flash program not touch it?
  
  2023-08-10 @ 22:57
  |
  Reply
honda

iPlay50Pro(T1030M)_JP_20230628のシステムファームウェアの仕方はどのようにすればいいですか？

2023-07-25 @ 10:05
|
Reply
nothing

How to root iPlay50?

2023-07-22 @ 21:38
|
Reply
1. nothing reply to nothing
  
  How to root iPlay50 Pro?
  
  2023-07-22 @ 21:40
  |
  Reply
George Villas

Hello my new Play50Pro(T1030M) come with T1030M_V2.0_20230324_20230324-1540 fw.
If check for OTA cant find anything says “Your device’s software is currently up to date.”
But here find uploaded the iPlay50Pro(T1030M)_EN_20230628 .
Are the newest from mine ??

Can download from here and made a local update ???

2023-07-18 @ 20:01
|
Reply
1. smithmarci reply to George Villas
  
  Hello George,
  
  Yes, you can. But you may need to decompress the RAR, and re-compress it as ZIP (with compression level: 0), so that way the system updater can handle it as local update. The file did not work for me as RAR, nor as decompressed folder. A free app called ZArchiver offers simple solution for the “conversion”.
  
  If your tablet does not reboot automatically after some time, you may have to reboot it into Recovery Mode (which during the screen will go dark for a long period of time, but that is normal – from Recovery Mode it will come back automatically)!
  
  2023-07-22 @ 20:52
  |
  Reply
  1. villasgeo reply to smithmarci
    
    Thanks i try this method
    
    2023-07-25 @ 15:52
    |
    Reply
  2. villasgeo reply to smithmarci
    
    I decompress and recompress in *.zip .
    
    I try to make a local update but says “Install fail Incorrect upgrade package parameter ”
    
    what are wrong ???
    
    2023-07-25 @ 17:11
    |
    Reply
    1. villasgeo reply to villasgeo
      
      Finaly i made the install from my computer via SP_Flash_Tool_v6.2228 .
      
      All are OK
      
      2023-07-25 @ 17:55
      |
      Reply
Jogi

I did my manual upgrade yesterday to (T1030M)_EN_20230608

Today I was offered an OTA update to T1030M_V2.0_20230628 and installed it.

A new MiraVision menu item now appears under Options / display.

Rudimentary settings for the screen colors are now offered here

The problem with third-party launchers has also been fixed since 20230608

More on that in my comment

https://www.alldocube.com/en/firmware/alldocube-iplay50prot1030m-firmware-download/comment-page-5/#comment-8308

2023-07-13 @ 03:11
|
Reply
1. Jogi reply to Jogi
  
  For flashing correctly und successfully, You need doing following steps of the MTK-manual exactly !!
  
  A)
  
  5. Locate the Authentication File. You can find the Authentication File NOT inside the SP Flash Tool V6 Folder. Please look the folder explained in B) BELOW
  
  6. Click on the DOWNLOAD button.
  
  7. CONNECT your Mediatek Device to the Computer using the USB Cable (make sure it is power off).
  
  8. After connecting the device to the Computer Press Volume DOWN OR VOLUME Up key, so that SP Flash Tool V6 can detect the device.
  
  9. Once the Computer detects the device, the flashing or installation process will begin AUTOMATICALLY
  
  10. Once the installation process is completed, a GREEN RING will appear. Close the SP Flash Tool V6 and DISCONNECT your Mediatek device from the
  
  -> How to flash or install XML Scatter firmware on Mediatek Devices
  https://androidmtk.com/install-xml-scatter-firmware-mediatek
  
  B)
  
  the only difference was the link to auth_sv5.auth
  this file is NOT included within the package P_Flash_Tool_v6.2228_Win
  
  The file can be found in the following package, which I also downloaded
  
  -> Download MT6789 DA File (Download Agent File)
  https://androiddatahost.com/yubrg
  
  You have to know that the CPU Helio G99 = MT6789 !!
  
  see the selection in the list
  
  -> Download MediaTek DA File for all models (all versions)
  https://androidmtk.com/mediatek-da-file
  
  2023-07-16 @ 21:49
  |
  Reply
chuiduma

we need android 13 update right?

2023-07-11 @ 13:30
|
Reply
Zekita

Once again OTA update not working. Gives error 20!

What is wrong with OTA updates?

2023-07-09 @ 06:39
|
Reply